DLink : Bug : set Link Aggregation with Static mode VLAN be change to 1 and noway to config.
 

Firmware Version: DGS-3630-28SC Build 2.00.020 and DXS-3000-32S Build 2.40.046

I want to use port 3-4 be trunk together as 1 Link.
I config port 3-4 to VLAN 2.
Set Link Aggregation with Static mode  on port 3-4 then VLAN be change to 1 and noway to config/correct.
The L3 switch, DGS-3630-28SC and DXS-3000-32S was the same.

This is the detail :
la_01 = VLAN 2 had been assigned to Port 3-4.
la_02 = Link Aggrregatin to Port 3-4 with static mode.
la_03 = Show detail of Link Aggrregatin.
la_04 = Back to VLAN list, Port 3-4 had been changed to VLAN 1.
la_05 = Show VLAN interface list.
la_06 = Show VLAN interface detail port 3.


la_01


la_02


la_03


la_04


la_05


la_06

Found the solution ....
At "VLAN interface list" scroll down to  the bottom.
Port-channel List..... Now config VLAN as you wish...

la_10 = Show VLAN interface list.
la_11 = Edit Port-channel interface.
la_12 = Back to VLAN list, Port 3-4 was corrected.

CLI use = interface port-channel xx


la_10


la_11


la_12

 

 ข่าวสาร

9/4/2561

คอมพิวเตอร์

9/4/2561